General Challenger

A component of any car or truck engine is an exhaust manifold for each bank of cylinders .In most production engines, the manifold is a cast iron assembly designed to collect the exhaust gas from two or more cylinders into one pipe. Engineers like cast iron because of its heat management properties and its superior longevity over any other type of exhaust outlet design. They also use the least metal, occupy less space and have the lowest production cost. Although these design restrictions...

Modern automatic transmissions can trace their origins to a gearbox that was developed in 1904 by the Sturtevant brothers. This unit had two forward speeds, the ratio change being brought about by flyweights that were driven by the engine. At higher engine speeds, high gear was engaged. As the vehicle slowed down and engine rpm decreased, the gearbox would shift back to low. One of the key developments in arriving at an automatic transmission was the use of planetary transmission in the...

Did you know that the controversial Dodge Demon name goes back 50 years? In 1970, the restyled Plymouth Valiant, named the Duster, was a massive success. Dodge immediately insisted on getting its own version. That car became the 1971 Dodge Demon. 1970 Plymouth Duster 340 Both the A-body Plymouth Duster and Dodge Demon were fantastic cars for the money (starting just over $2,100). The two cars were virtually identical, underneath. The attractive-looking Demon came with four optional...

Here are some drag racing tips to make your trip to the drag strip safe and successful. Before you arrive at track Remove the floor mats, child seats (if applicable) and other non-essential cargo. Every bit of weight you remove can help. Try to plan so you have about ¼ tank of fuel when you arrive. Extra fuel adds weight and you won’t need more than ¼ tank. Don’t show up with your tank on empty. The fuel is usually expensive at the track and you don’t want to be “running on fumes.”...

Alan R. Welch and his brothers, owners of the Welch Motor Car Company, are credited for pioneering the first hemispherical engine. The power plant was a simple 20-horsepower, 2-cylinder engine with a single overhead camshaft. Although the General Motors discontinued the HEMI in 1910 when it bought Welch, Peugeot developed its own hemispherical engine. BMW mass-produced a HEMI version before Chrysler engineered it for modern use. Three generations of Hemi engines have been built by Chrysler...

Dodge was founded in 1900 by Horace and John Dodge (The Dodge Brothers). It was initially known as the Dodge Brothers Company and used to sell bicycles, but then within two years it became a major supplier of axles, engines, and transmissions to the automobile industry. The company started by producing chassis and engines for the Ford Motor Company and Olds Motor Vehicle Company. However, with the stress and demands of the booming automobile industry, the brothers decided to tinker with the...

From its humble origins, the headlight has evolved from what was considered an accessory of the 1900s to a necessity safety feature (half of all deadly accidents occur at night). Since its first generation, headlights have traveled a long way from a simple flame to a high-tech laser. Carbide Headlights The first vehicle headlamps were officially introduced during the 1880s and were based on acetylene and oil, similar to the old gas lamps. Originally developed for mining purposes, Carbide...

Juice. Squeeze. Laughing gas. Nitrous oxide has many aliases. It can inject a healthy dose of horsepower into an engine, via direct port, carburetor/throttle body plate, air intake tube or, air cleaner injection, to give a race car the winning edge at the track. In racing, nitrous oxide (often referred to as just "nitrous") allows an engine to burn more fuel by providing more oxygen than air alone, resulting in a more powerful combustion. The gas is not flammable at a low...

Paddle shifters, once exclusive to race cars and exotic sports cars, like the Ferrari F430, are now becoming commonplace on performance cars with automatic transmissions. This is because manual transmissions are going away faster than the landline telephone. Critics of automatics say that they take the passion and command out of driving. Paddle shifters, however, bring some of that joy and control back by allowing drivers to manually shift an automatic transmission with steering-wheel or...

In the late 60s/early 70s, Dodge was already offering some of the hottest cars of the muscle car era- awesome machines like the Hemi Challenger and 440 Six-Pack Super Bee. Designers, however, decided to rev up the cars’ visuals to match, creating a far-out assortment of vibrant exterior paint colors. These special colors (a $15 option) generated a big buzz in the showrooms and launched an industry trend. The color palettes used by all the automakers were opened up, giving paint designers...

The Dodge Scat Pack was originally introduced in 1968 with the Charger R/T, Coronet R/T, Dart GTS, and Super Bee. In 1969, the Charger Daytona joined the Pack. In order for a car to enter the Scat Pack it had to be capable of running the quarter mile in the 14s (14.99 sec. or faster). Mainly a marketing term, Scat Pack cars got twin bumblebee stripes and special decals. It became legendary in the enthusiast community and symbolized one of the most feared groups of street machines every to...

When choosing aftermarket wheels for your Challenger, there is a considerable amount of choice. Car wheel technology has evolved considerably, over the years, from steel- once the preferred material- to lighter weight aluminum alloys. Among all types, you have the option of choosing between forged and cast wheels. In discussing the difference between the two, it is important to distinguish between the advantages and disadvantages of forging and casting. The strength of any metallic product...

Racing stripes are usually a “must have” for owners of muscle cars. These stripes, originally called “go faster stripes,” first appeared on Cunningham race cars in 1951. Two parallel blue stripes ran from front to rear in the center of the white car body. Their main purpose was to help spectators identify the cars during races. They evolved from the traditional FIA registered U.S. Racing color of a white body and blue chassis, which dated from when racing cars had the chassis exposed. The...

A car spoiler is a stylish automobile accessory that can be mounted on the rear of most cars. There are many different styles of spoilers. The general shape consists of a slender slightly downward angled piece of metal, fiberglass, silicone or carbon fiber that is usually the width of the vehicle. Some seem to appear to mold into the vehicle and others stick out with two small ledges on both sides. The term "spoiler" is often mistakenly used interchangeably with "wing." An automotive wing...

Back in middle school science class, we learned that in order to make fire, you need three ingredients: fuel, ignition and air- or, more specifically, oxygen. You’ll also remember that cold air is denser than hot air, putting more oxygen in the same amount of volume. While the modern internal combustion engine does a fine job of delivering fuel and ignition, that cold air part becomes tricky as you try to route fresh air from outside through a hot engine compartment. In response, in the late...