General Challenger

General Challenger

Evolution of Rear Spoilers

A car spoiler is a stylish automobile accessory that can be mounted on the rear of most cars. There are many different styles of spoilers. The general shape consists of a slender slightly downward angled piece of metal, fiberglass, silicone or carbon fiber that is usually the width of the vehicle. Some seem to appear to mold into the vehicle and others stick out with two small ledges on both sides. The term "spoiler" is often mistakenly used interchangeably with "wing." An automotive wing...
General Challenger

Hemi Heads

In recent years, Dodge has produced four different Hemi heads. Here is a brief description of each. In 2003, the 5.7 Hemi received the first, followed in 2005 by the 6.1 hemi design. In 2009 and 2011 respectively, the 5.7 Hemi Eagle and 6.4 Hemi Apache head appeared along with Variable Valve Timing (VVT) and the larger 392-inch engine. As the engines got larger, the heads improved with the help of larger valve sizes and improved ports. As cams got bigger, the beehive springs got more...
General Challenger

Pulling Fuse #2 and Adaptives

HERE'S WHAT HAPPENS WHEN YOU PULL #2 FUSE (older Challengers) Pulling Fuse F2 resets: All PCM DTCs erased. All OBD2 monitor results erased. All "long term fuel trim adaptive" values reset to Zero. Long term Fuel Adaptive trim will now start over the next 100 engine start cycles. Cycle the headlights as described above will create a Short Term Fuel Adaptive trim table over the next 50 start cycles. Driver Adaptive? Driver Adaptive and related fuel table trim is probably the least...
General Challenger

The Elephant: A History of Chrysler’s Hemi Engine

Not sure how this will work, but is a great article [URL]https://thecaraficionada.com/history-chryslers-hemi-engine/[/URL]
General Challenger

Shock Absorbers

An automobile shock absorber is basically a hydraulic piston that absorbs and dissipates vibration using spring-loaded check valves and orifices to control the flow of oil. The first production hydraulic dampers, to act on the main leaf spring movement, were probably those based on an original 1908 concept by Maurice Houdaille. One design consideration, when designing or choosing a shock absorber, is where that energy will go. In most shock absorbers, energy is converted to heat inside the...

General Challenger

"Grandfather" of the 2018 Dodge Demon

Did you know that the controversial Dodge Demon name goes back 50 years? In 1970, the restyled Plymouth Valiant, named the Duster, was a massive success. Dodge immediately insisted on getting its own version. That car became the 1971 Dodge Demon. 1970 Plymouth Duster 340 Both the A-body Plymouth Duster and Dodge Demon were fantastic cars for the money (starting just over $2,100). The two cars were virtually identical, underneath. The attractive-looking Demon came with four optional...
General Challenger

0% financing

Wondering if anyone has any insight or thoughts into the current offer of 0% a.p.r. for 72 mos. I wonder, will this be a one-time deal? I've literally wanted one of these cars since 07, when they came out. For one reason and another over the years, I've never yet pulled the trigger. Got on this forum several years ago, to follow the latest news and info. I've lurked, enjoyed your guys' posts and kept on dreaming of the day. I've said for years, "why can't they offer 0% on the damn...
General Challenger

100 Anniversary Edition Challenger.

Hello, I have a 2014 Anniversary Edition Challenger. purchased it new in 2014. Since then, I have NOT seen any other anniversary models on the road, except I did see a 2014 anniversary Charger. Everywhere I go, a lot of Mopar guys ask me, What model is your car. In the winter time, its kept in the garage, covered and I drive my Ram. Which is also awesome. Several people at car shows ask if I want to sell it. The answer is, always, NO. I love this car. I have under 30,000 miles. Now, I've...
General Challenger

Featured
100th Article! Dodge Brothers

Few people are aware of the important role that John and Horace Dodge played in shaping Detroit’s early auto industry, and of the story of a dynamic partnership formed between two enterprising brothers who remained inseparable throughout their lives. John (right) and Horace Dodge HUMBLE BEGINNINGS Born into an industrious but poor family, Dodge brothers, John (born in 1864) and Horace (born in 1868), received their mechanical training from working in their father’s machine shop, in Niles,...
General Challenger

226 mm / 8.89 in. LSD CV Axle Shafts only currently available through Mopar in North America.

These axle shafts required for the 2008 - 2014 LSD rear wheel differentials are not currently available through Cordone (remanufactured) and despite catalogue indications to the contrary not even produced by Trakmotive / SurTrack / GSP North America. East Coast Mopars and others providing the Getrag swap pkgs. are using axles provided by Mopar, at similar pricing to the dealerships. I can't even find used axles through auto wreckers in western Canada. Sharing this so others don't waste their...
General Challenger

3.6L Pentastar Engine

A popular cost-conscious alternative for Challenger owners to the 5.7L and 6.4L Hemi engines is the 3.6L Pentastar engine. It replaced the 3.5L engine, in 2012, and is rated at an impressive 305 horsepower and 270 lb.-ft. of torque, with 90% of its torque available from 1,800 to 6,350 rpm. Performance from this modern 6-cylinder engine actually exceeds some small blocks from the first muscle car era. Before the first aluminum block was cast, the new Pentastar V-6 benefited from more than...
General Challenger

A Guide to Locking Lug Nuts

Do you want to protect your wheels and tires from being stolen? The best security is locking lug nuts. These special wheel locks will help keep your wheels and tires safe even in dangerous neighborhoods or unlit parking lots. You’ll sleep better at night knowing that they will still be on your car when you wake up in the morning. Without a unique key, most thieves will be stopped in their tracks if they attempt to steal your rims and may move on to easier scores. Thieves are not only after...
General Challenger

A Look Back- The Rebirth of the Challenger

The Challenger concept car, shown at the 2006 Detroit International Auto Show, was a big tease for Mopar fans. It was the answer to a hot rodders’ dream- the reincarnation of a 1970s Dodge muscle car! But, would it make it to production? See the 15:11 minute mark of the following video: Based on the success of the retro-inspired 2005 Mustang GT, Dodge looked at its parts bins and figured out how to use this stuff to create a modern-day Challenger. To accomplish this feat, Chrysler drew...
General Challenger

Featured
Active Exhaust

It’s a fact of life- cars make noise. Inexplicably, there are those in this world who build houses next to major freeways and then complain about the speed of the vehicles going past. There are those who build houses next to airports and complain about the excessive noise. Just as there are those people, there were those who decided that cars were too loud and needed to shut up! This presented car companies with a problem. Their engineers were telling them that for maximum efficiency,...
General Challenger

All-Wheel Drive

Four-wheel drive, 4WD, 4x4 ("four by four"), or AWD ("all-wheel drive") is a four-wheeled vehicle with a drivetrain that allows all four wheels to receive torque from the engine simultaneously. While many people associate the term with off-road vehicles and sport utility vehicles, powering all four wheels provides better control in normal road cars on many surfaces, and is an important part in the sport of rallying. The first application of four-wheel drive, occurred in 1893. In 1937, the...
General Challenger

Anti-Sway Bars

An anti-roll bar (roll bar, anti-sway bar, sway bar, or stabilizer bar) is a part of many automobile suspensions that helps reduce body roll during fast cornering or over road irregularities. It connects opposite (left/right) wheels together through short lever arms linked by a torsion spring. A sway bar increases the suspension's roll stiffness- its resistance to roll in turns, independent of its spring rate in the vertical direction. The first stabilizer bar patent was awarded to Canadian...
General Challenger

Featured
Are Most Radar Detectors Useless?

A radar detector is an electronic device that has been used by motorists, for decades, to detect if their speed is being monitored by police using a radar gun. It gave a driver sufficient warning to reduce his speed to avoid being ticketed for speeding. In a general sense, only emitting technologies, like Doppler radar, or LIDAR (pulsed laser light) can be detected. Visual speed estimating techniques, like ANPR or VASCAR cannot be detected in daytime. There are also no reports that piezo...
General Challenger

Auto-Stop/Start Technology

Since the Obama Administration finalized standards in 2012, to encourage the automotive industry to reach a 54.5 miles per gallon corporate fuel economy average by 2025, manufacturers have been employing every means possible to squeeze another mile out of a gallon of gasoline. A combination of aerodynamics, weight savings, electrification, hybrid technologies and advanced engine management software has gone a long way, but it doesn’t take a rocket scientist to understand that you save a lot...
General Challenger

Featured
Axle Ratios

An axle ratio is the number of revolutions the output shaft or driveshaft needs to make in order to spin the axle one complete turn. The number is expressed in a ratio, which represents the number of teeth on the ring gear divided by the number of teeth on the pinion. For example, a vehicle with a 3.73:1 gear ratio means that the driveshaft will turn 3.73 times for each complete wheel spin. Many people simply refer to the axle ratio as 3.73, rather than express it as the ratio 3.73:1....
General Challenger

Blind Spot Monitoring

What is Blind-Spot Monitoring? Blind-spot monitoring one of those features we didn’t know we needed or wanted until carmakers began offering it. Volvo was the first, incidentally. It offered its Blind Spot Information System (BLIS) for the S80 in 2005. BSM is just what its name implies. It keeps an eye on the space just off the rear quarter areas of your vehicle. These blind spots can hide a vehicle approaching in an adjacent lane because many drivers improperly set their car’s outboard...