I have an 2009 RT with the 5.7 and just bought a 6.1L intake. I need the stock fuel rails for that intake. I looked on the Rock Auto site and don't see them listed. The guy I bought the intake from game me some after market rails but they wont work with my shaker mount. If you know the part numbers and such..... so any help will be appreciated.
Just want to let you know. Good luck finding this part at a parts house or dealership.... out of stock to discontinued. Which means. If it goes bad or needs replacing, you have to go after market,... good thing is, the guy that sold me the intake actually found one at one of his buddy’s speed shop and is getting that for me... Sent from my iPad using Tapatalk
Another option would be to buy the OEM fuel rails from an auto salvage company. There are several national databases on line. If you prefer after market fuel rails, there are several available. Some are actually an upgrade that can increase the amount of fuel that the fuel injectors have to draw from. Also some come with pulse dampers that can reduce the effects of engine harmonics/vibrations on the fuel injectors. Here is a link to one: https://www.a2speed.com/c-272-hemi-fuel-rails.aspx?manufacturerid=42&startPrice=0&endPrice=0
That I know. But they will not fit with the shaker as the mounting tabs are too thick and will make the shaker hit the hood. That’s why with the stock ones they just have a thin metal tab to mount with. The intake I bought had after market hi priced ones. Too thick where the mounting points are. Sent from my iPhone using Tapatalk
Can’t modify the shaker mount. But was looking at grinding down the tabs to make them thinner, but since I did find a set of the stock ones, I won’t be doing any grinding.. Sent from my iPad using Tapatalk
It's at times like this that I step back, dig way down into my tool box and pull out the only two solutions left: Velcro (for "needs to be removable") and Duct Tape (for "no need to remove").