Reproduction Rallye Wheels

Discussion in 'Challenger Wheels, Tires and Brakes Forum' started by SRT-Tom, Dec 20, 2021.

Page 1 of 2
  1. Dec 20, 2021 at 9:58 AM #1
    SRT-Tom

    SRT-Tom Well-Known Member Staff Member Super Moderator Article Writer

    Posts:
    7,093
    Likes Received:
    2,222
    Joined:
    Oct 2, 2011
    Location:
    southern New Jersey
    YEARONE Muscle Car Parts, Braselton, GA is offering a modern, 20 X 9, cast aluminum Mopar Rallye Wheel. It is silver powder coated with a machined lip, 5-1/8" backspacing or +3.2mm offset and 5x115mm bolt pattern.

    This may be a nice addition for you guys who are going all-out with the 70s retro theme.

    [​IMG]

    https://www.yearone.com/SearchResults/Challenger-Cuda/wheels
     
    IntimidatorRT likes this.
  2. Dec 20, 2021 at 11:28 AM #2
    Wm TPA SXT

    Wm TPA SXT Full Access Member

    Posts:
    246
    Likes Received:
    109
    Joined:
    Jan 13, 2021
    Location:
    .
    I had hours on the phone and Emails with Year One and their President who also had same idea. He then proceeded to get these to come forward. Here is Photos of the Wheels on some Promo Cars , The Wheels will fit with no Spacer or adapter on all Modern LX Gen 3 Challengers, Chargers 300m and Magnum Wagons.

    They Clear 1 2 and even 4 Piston Front Caliper Brakes If you have A Wide Body you need 1 1/4" Spacer to bring them to proper alignment, and on Non Wide Body with the 6 Piston Brembo you need a 1/4" Spacer.

    Read tons of post where people kept asking if anyone made them and them read comments it cant be done or it would of been done already! Not true the Actual Wheel is same Contour and Center Cap Section these are true 115mm Bolt. When I contacted Year one and several companies the worse I could of been told wasNo. The Year one President got my messages and Renderings and said yes, If you got an Idea or interest just reach out and be persistent, patient, and go from there.

    They will be in Bright Silver, Argent, Same for the original Caps which fit these and the ACORN Caps fit as well.

    Here is the Photos...

    upload_2021-12-20_11-19-30.jpeg

    upload_2021-12-20_11-19-48.jpeg
    upload_2021-12-20_11-20-12.jpeg
    upload_2021-12-20_11-20-30.jpeg

    upload_2021-12-20_11-20-53.jpeg

    Untitled-1.jpg
     
    Last edited: Dec 20, 2021
  3. Dec 20, 2021 at 11:31 AM #3
    Wm TPA SXT

    Wm TPA SXT Full Access Member

    Posts:
    246
    Likes Received:
    109
    Joined:
    Jan 13, 2021
    Location:
    .
    More Photos

    upload_2021-12-20_11-30-12.jpeg

    Un2.jpg
     
  4. Dec 20, 2021 at 11:42 AM #4
    Wm TPA SXT

    Wm TPA SXT Full Access Member

    Posts:
    246
    Likes Received:
    109
    Joined:
    Jan 13, 2021
    Location:
    .
    Now we need BF Good Rich, Goodyear and other Tire MFG to actually bring back some RWL Tires for these. So please reach out to them maybe we can get that done for
    our Cars to really complete that 70's feel and look. Also hope some will contact Retro-USA and ask them to bring back the Chrome Bumper and Trim Kits for the Challengers....
    Bill
     
    B5blueRT and 70-426_10-SRT like this.
  5. Dec 20, 2021 at 8:39 PM #5
    Cloverdale

    Cloverdale Full Access Member

    Posts:
    643
    Likes Received:
    187
    Joined:
    May 30, 2020
    Location:
    Cloverdale
    9 inches of width on a 20 inch wheel doesn't look or perform very muscularly given tire width limitations. The 17 inch option wouldn't look as bad. Nice side view look though.
     
  6. Dec 20, 2021 at 10:07 PM #6
    70-426_10-SRT

    70-426_10-SRT B&E body lover

    Age:
    64
    Posts:
    1,946
    Likes Received:
    899
    Joined:
    Jun 25, 2018
    Location:
    PDX
    1st thought: NO Chrome Ring :(
    Then I thought, WOW, No Chrome Ring :)

    Next: But Should offer 8" & 10" width
     
    Chief93 likes this.
  7. Dec 21, 2021 at 12:26 AM #7
    Wm TPA SXT

    Wm TPA SXT Full Access Member

    Posts:
    246
    Likes Received:
    109
    Joined:
    Jan 13, 2021
    Location:
    .
    Have to see how these go first and then from there.
    Up till no only similar to a Rallye was Foose at nearly 6800.00 for 4 wheels...
    The Foose Look horrible these were done right and took some reaching out to get someone on board to do them and Year One was
    the best to get to do this so a Miracle. I know I will never be able to own a Classic Challenger after spending over 6 months in a Hospital
    5 1/2 from a CVA Stroke the other 2 weeks from a Heart Attack in 2017. The Bill was upwards near 240k range.

    Im an old school person and love the look this will help bring together.
    Bill
     
  8. Dec 21, 2021 at 11:24 AM #8
    Wm TPA SXT

    Wm TPA SXT Full Access Member

    Posts:
    246
    Likes Received:
    109
    Joined:
    Jan 13, 2021
    Location:
    .
    Dark ones to follow
     
    Last edited: Dec 21, 2021
  9. Dec 21, 2021 at 9:39 PM #9
    Wm TPA SXT

    Wm TPA SXT Full Access Member

    Posts:
    246
    Likes Received:
    109
    Joined:
    Jan 13, 2021
    Location:
    .
    Most 18's and 20's on the Modern Challengers are 9"
     
  10. Dec 22, 2021 at 12:36 AM #10
    Cloverdale

    Cloverdale Full Access Member

    Posts:
    643
    Likes Received:
    187
    Joined:
    May 30, 2020
    Location:
    Cloverdale
    Another of so many missed design opportunities (this one in part responsible for bolt-on fender flares).
     
Page 1 of 2