General Challenger

  • Mopar Automatic Transmissions

    Modern automatic transmissions can trace their origins to a gearbox that was developed in 1904 by the Sturtevant brothers. This unit had two forward speeds, the ratio change being brought about by flyweights that were driven by the engine. At higher engine speeds, high gear was engaged. As the vehicle slowed down and engine rpm decreased, the gearbox would shift back to low. One of the key developments in arriving at an automatic transmission was the use of planetary transmission in the...
  • Security Devices

    As you know, there has been an ongoing problem concerning the theft of high performance Dodge cars, notably Hellcat and Scat Pack Challengers and Chargers. Security devices are now more important than ever. They can be categorized as follows deterrent devices, anti-theft devices and tracking devices. Deterrent Devices Alarm System Alarm systems are only effective in areas where they will attract immediate attention. And unless the alarm is unique, it will be ignored. If you want to add...
  • Safety Regulations/Equipment for Racing

    If you plan to enter your vehicle in any competition sanctioned by the NHRA, your Challenger is going to have to pass a series of pre-race inspections for the required safety equipment. These requirements get more stringent as the expected horsepower and speeds increase.The SFI Foundation sets the standard for quality assurance in the vast majority of aftermarket and performance products. Basic Safety The basic safety stuff for the street legal classes is pretty simple. You’ve got to have...
  • How the EPA Tests Vehicles for Mileage

    Fuel economy for vehicles (city, highway and combined) is measured under controlled conditions in a laboratory using a series of tests specified by federal law.The results are displayed for the consumer on the "new car window sticker." Estimating MPG with Laboratory Tests In the laboratory, the vehicle's drive wheels are placed on a machine called a dynamometer. The "dyno" simulates the driving environment much like an exercise bike simulates cycling. Engineers adjust the amount of energy...
  • The Origin of Scat Pack

    The Dodge Scat Pack was originally introduced in 1968 with the Charger R/T, Coronet R/T, Dart GTS, and Super Bee. In 1969, the Charger Daytona joined the Pack. In order for a car to enter the Scat Pack it had to be capable of running the quarter mile in the 14s (14.99 sec. or faster). Mainly a marketing term, Scat Pack cars got twin bumblebee stripes and special decals. It became legendary in the enthusiast community and symbolized one of the most feared groups of street machines every to...
  1. stay stock or not

    I've got a 2014 billet silver with the red stripe rally redline, and was wandering would it be better to keep the paint scheme and stripe the same to keep it original or change it up a little i haven't seen 1 like mine and only know of 1 other one in my area. thats black with the red stripe .i plan on lowering it and tinting the windows and possibly changing the stripes, and maybe going a little darker paint like a gray with black stripes but not the same as what i have now.i know theres not...
  2. Superchargers vs. Turbochargers

    When designing an engine to pull in more than atmospheric pressure, engineers often turn to forced induction. It’s one of the fastest ways to add significant power to almost any engine, and there are two prevalent ways it can be done: supercharging and turbocharging. But, which is better? Both are different in terms of how they work, performance and cost. Both operate on the principle that the more air you can get into your engine, the more power your car will make. Supercharging is old...
  3. The Advantages & Disadvantages of Lowering Your Car

    Cars come with conventional-size and strength springs that help it deal with potholes and bumps on the road. Manufacturers have spent considerable time and money to come up with just the right suspension components. Nevertheless, it has become fairly common for car owners to modify their cars’ suspensions to make them ride lower. Usually aesthetics are one of the most important reasons for reducing ride height- many people prefer the appearance of a lower car- but there are other...
  4. The Elephant: A History of Chrysler’s Hemi Engine

    Not sure how this will work, but is a great article [URL]https://thecaraficionada.com/history-chryslers-hemi-engine/[/URL]
  5. The History of Car Antennas

    Automotive antennas have evolved since their introduction in the 1930s. Once tacked on as optional equipment, they are now designed into the car as an indispensable accessory. Several different approaches have been used to improve performance while making the antenna attractive, including embedded windshield versions and electric hide-away styles. The First Antennas In the 1930s, car antennas were incorporated into the radio body, as most stations were in the AM band, which required a...
  6. The Meaning of "Mopar"

    Short for the Chrysler Motor Parts Corporation, Mopar made its first appearance in the late 1920s and became its own brand in 1937. The name Mopar was created by a committee to market cans of "Chrysler Motor Parts" antifreeze. From there, the Mopar catalog expanded to include waxes, cleaners, filters, engine parts and more. Now, in its 85th year, Mopar encompasses the full line of Fiat Chrysler Automobiles parts, accessories, and customer service, including Fiat and Alfa Romeo brands...
  7. The Origin of Scat Pack

    The Dodge Scat Pack was originally introduced in 1968 with the Charger R/T, Coronet R/T, Dart GTS, and Super Bee. In 1969, the Charger Daytona joined the Pack. In order for a car to enter the Scat Pack it had to be capable of running the quarter mile in the 14s (14.99 sec. or faster). Mainly a marketing term, Scat Pack cars got twin bumblebee stripes and special decals. It became legendary in the enthusiast community and symbolized one of the most feared groups of street machines every to...
  8. The Right Size Wheel for Your Tire

    It is important to ensure your vehicle is installed with a properly sized tire. Each tire size is designed to fit a specific rim width. The correct rim width allows the tire sidewall to flex where the designers meant for the flex to occur. There is a wide range of tires that will fit a specific rim width. After you know what size range of tire will fit your wheels, you can pick a size based on aspect ratio and height of the different tire sizes. A rim that is too narrow in relation to the...
  9. Tim Kuniskis- A Real Car Guy

    Timothy (Tim) Kuniskis was named Dodge Brand and Interim Chrysler Brand Chief Executive Officer - Stellantis in January 2021. Prior to that, in June 2019, he was Head of Passenger Cars- North America in and Global Head of Alfa Romeo in February 2018. He has been a member of the Group Executive Council (GEC) since October 2015. In other words, he oversees the Alfa Romeo brand around the world while leading Chrysler and Dodge passenger car programs in the United States. Kuniskis has connected...
  10. Tips for Car Shows

    Winning a car show is great satisfaction. The real reward, however, is having a group of knowledgeable people say that they respect your style, taste and hard work. If you’re one of those people that take car shows seriously, here are a few tips that might help you win. Before The Show The Build- Restoring or Modifying Your Car Some owners rack up their credit cards doing things to their cars for the sole purpose of “checking off that box” on the judges’ score sheet. The funny thing is,...
  11. Tire Contact Patch

    All vehicles are supported by a cushion of air contained in four flexible rubber tires. Each tire’s contact patch, or “footprint,” is a little smaller than a hand. As a result, not much of the tire's surface area is touching the ground, so the amount that does touch the ground must handle a great deal of weight (i.e., load) and force. These four patches create the traction which makes the vehicle go, stop and turn. Basically, they send feedback to the driver which helps to control the...
  12. Tire Speed Ratings

    Tire speed ratings first originated in Europe in the 1960s, as a way to make sure increasingly faster vehicles were equipped with appropriate safe tires. These early speed ratings set the foundation for the current speed rating system used by the DOT and tire manufacturers. Every tire approved for highway use by the Department of Transportation comes with a particular speed rating. The speed rating is a letter corresponding to the maximum safe speed at which a tire can be driven, as...
  13. Tstats and Engine Temperature

    As we all know, the main purpose of a thermostat (tstat) is to maintain your Challenger’s engine at the ideal operating temperature and help produce fewer emissions. First, let’s talk about how a tstat functions and then why racers install low temperature ones. Basically, the thermostat starts at a closed position when you start the engine to help it reach operating temperature. While the engine is running, the coolant temperature slowly rises, making the thermostat begin to open. The...
  14. Types of Tires

    Tires come in many treads, sizes and performance characteristics. Here is a primer on the basic car tire categories and some popular consumer choices. Extreme Performance Summer Hyper-focused on extreme dry grip, but gives up wet traction, comfort and tread life to get it. Not to be driven in near-freezing temperatures, in snow or on ice, or at high speeds in deep standing water, these specially tuned tires combine big-block tread designs with aggressive tread compounds and reinforced...
  15. Understanding Wheel Offset

    The offset of a wheel is the distance from its hub mounting surface to the center line of the wheel. The whole point of an offset is for the end user of the wheel to know how much in inches (4+3), or in the case of millimeter offset, how many mm the wheel will stick out or tuck in from the mounting surface of the hub. Remember, even a couple of millimeters can affect performance, ride quality, the look/stance of your vehicle and safety. It takes precise measurement to make sure aftermarket...
Loading...