General Challenger

  • Hemi Heads

    In recent years, Dodge has produced four different Hemi heads. Here is a brief description of each. In 2003, the 5.7 Hemi received the first, followed in 2005 by the 6.1 hemi design. In 2009 and 2011 respectively, the 5.7 Hemi Eagle and 6.4 Hemi Apache head appeared along with Variable Valve Timing (VVT) and the larger 392-inch engine. As the engines got larger, the heads improved with the help of larger valve sizes and improved ports. As cams got bigger, the beehive springs got more...
  • Mopar Engine Colors

    Automobile engines are usually painted bright colors, like red, orange or blue. This just isn’t for appearance. There is a practical purpose. Bright colors enable leaks to be spotted easily. Here is a list of engine colors (and paint codes) used by Mopar, from 1962 to 1971. Race Hemi Orange- Mopar P4120751 1962-1964 Max Wedge engines (413 and 426 Cross Ram) 1964-1965 426 Race Hemis Street Hemi Orange- Mopar P4349216 1966-1971 426 Street Hemis 1969-1971 High performance 383 and 440...
  • How Do Navigation Systems Work?

    Getting lost while driving, or stopping at a gas station to ask for directions, has become a thing of the past. With GPS in your car’s navigation system, in the portable navigation device on your dashboard, or in your smartphone, it is easy to pull up a map and see where you are, or get directions to where you are going. GPS makes you safer, routes you around traffic delays and helps you find nearby services. GPS (Global Positioning System), a technology we now take for granted, started...
  • Dim to Bright- Headlight Technology

    From its humble origins, the headlight has evolved from what was considered an accessory of the 1900s to a necessity safety feature (half of all deadly accidents occur at night). Since its first generation, headlights have traveled a long way from a simple flame to a high-tech laser. Carbide Headlights The first vehicle headlamps were officially introduced during the 1880s and were based on acetylene and oil, similar to the old gas lamps. Originally developed for mining purposes, Carbide...
  • how to wire up the solenoid when doing a 6.4l manifold to a 5.7l swap

    a lot of questions have been fielded about how to wire the msd window switch for the 6.4l short runner tuning valve. i sat down on a recent vacation and worked my way backwards to figure how to painlessly wire this system so it works close to what the factory intended. i have acess to all the service information from FCA being that i work for them. get the connector from chrysler for the solenoid. DON'T buy the circuit boss, it is confusing and unnescessary. the red wire from the window...
  1. History of SRT

    Performance vehicles are a Chrysler tradition. In the 1950s, an elite team of Chrysler engineers set out to extract extreme horsepower from existing engines. The team created new manifolds featuring long-tube intake runners. The innovative design helped engines ingest more air, translating into improved performance. The new induction system was called “Ramcharger,” and the team behind the technology adopted that name. The Ramchargers’ new engine produced enormous amounts of power,...
  2. Slicks & Drag Radials

    Drag radial street-legal tires had their origin in racing. Originally, race cars used “racing slicks”- a type of tire with a smooth tread. The first production "slicks” were developed by M&H Tires in the early 1950s for use in contact patch to the track and maximized traction for any given tire dimension. Slicks were also used on road and oval track racing where steering and braking require maximum traction from each wheel. Slicks, however, are not suitable for use on street cars which...
  3. Ronnie Sox- A Tribute to "Mr. Four Speed"

    Ronnie Sox is one of the greatest Mopar drag racers. Like many who eventually became professional racers, "The Boss," grew up around cars, raised in the shadow of his family’s Sinclair service station. As soon as he was old enough to drive, Sox began competing in drag races, sponsored by the Police Club of Burlington, NC, at a local airport. In the early days, Sox didn’t even own a car and used his father’s 1949 Olds. From these humble beginnings, Sox would go on to become what many...
  4. Hood Pins

    Hood pins are used as a secondary restraint for the hood and are attached by a pin and plate drilled through the hood. They were originally made for the racetrack to keep hoods buttoned down at high speeds, but found their way onto muscle cars of the late 60s/early 70s. Hood pins (two per hood) were most prevalent on Dodge and Plymouth muscle cars of that era (e.g., Challengers, ‘Cudas, Road Runners, Daytonas, GTXs, Super Bees, etc.). They were, primarily, a styling element used to give a...
  5. Forged vs. Cast Wheels

    When choosing aftermarket wheels for your Challenger, there is a considerable amount of choice. Car wheel technology has evolved considerably, over the years, from steel- once the preferred material- to lighter weight aluminum alloys. Among all types, you have the option of choosing between forged and cast wheels. In discussing the difference between the two, it is important to distinguish between the advantages and disadvantages of forging and casting. The strength of any metallic product...
  6. Nitrous Oxide

    Juice. Squeeze. Laughing gas. Nitrous oxide has many aliases. It can inject a healthy dose of horsepower into an engine, via direct port, carburetor/throttle body plate, air intake tube or, air cleaner injection, to give a race car the winning edge at the track. In racing, nitrous oxide (often referred to as just "nitrous") allows an engine to burn more fuel by providing more oxygen than air alone, resulting in a more powerful combustion. The gas is not flammable at a low...
  7. Dim to Bright- Headlight Technology

    From its humble origins, the headlight has evolved from what was considered an accessory of the 1900s to a necessity safety feature (half of all deadly accidents occur at night). Since its first generation, headlights have traveled a long way from a simple flame to a high-tech laser. Carbide Headlights The first vehicle headlamps were officially introduced during the 1880s and were based on acetylene and oil, similar to the old gas lamps. Originally developed for mining purposes, Carbide...
  8. Development & Evolution of the Hemi Engine

    Alan R. Welch and his brothers, owners of the Welch Motor Car Company, are credited for pioneering the first hemispherical engine. The power plant was a simple 20-horsepower, 2-cylinder engine with a single overhead camshaft. Although the General Motors discontinued the HEMI in 1910 when it bought Welch, Peugeot developed its own hemispherical engine. BMW mass-produced a HEMI version before Chrysler engineered it for modern use. Three generations of Hemi engines have been built by Chrysler...
  9. Drag Racing Primer- Tips with Street Tires

    Here are some drag racing tips to make your trip to the drag strip safe and successful. Before you arrive at track Remove the floor mats, child seats (if applicable) and other non-essential cargo. Every bit of weight you remove can help. Try to plan so you have about ¼ tank of fuel when you arrive. Extra fuel adds weight and you won’t need more than ¼ tank. Don’t show up with your tank on empty. The fuel is usually expensive at the track and you don’t want to be “running on fumes.”...
  10. Mopar Automatic Transmissions

    Modern automatic transmissions can trace their origins to a gearbox that was developed in 1904 by the Sturtevant brothers. This unit had two forward speeds, the ratio change being brought about by flyweights that were driven by the engine. At higher engine speeds, high gear was engaged. As the vehicle slowed down and engine rpm decreased, the gearbox would shift back to low. One of the key developments in arriving at an automatic transmission was the use of planetary transmission in the...
  11. Exhaust Headers

    A component of any car or truck engine is an exhaust manifold for each bank of cylinders .In most production engines, the manifold is a cast iron assembly designed to collect the exhaust gas from two or more cylinders into one pipe. Engineers like cast iron because of its heat management properties and its superior longevity over any other type of exhaust outlet design. They also use the least metal, occupy less space and have the lowest production cost. Although these design restrictions...
  12. Mufflers

    Since the beginning of hot rodding, enthusiasts have tinkered with their car’s exhaust system, particularly the mufflers, to get the “right sound.” A muffler’s job sounds easy enough- reduce exhaust volume to tolerable levels while allowing the sweet sounds of your ride to waft through the air. But this becomes a monumental task as horsepower increases. Engines build horsepower by pushing spent exhaust out of the tailpipe as fast as possible. As pistons furiously churn, exhaust velocity...
  13. Ignition Coils

    An ignition coil (also called a spark coil) is an induction coil in an automobile's ignition system. It transforms the battery's low voltage to the thousands of volts needed to create an electric spark in the spark plugs to ignite the fuel. Early gasoline internal combustion engines used a magneto ignition system, since vehicles did not have batteries. The voltage produced by a magneto was dependent on the speed of the engine, making starting difficult. A battery-operated coil, however,...
  14. The Right Size Wheel for Your Tire

    It is important to ensure your vehicle is installed with a properly sized tire. Each tire size is designed to fit a specific rim width. The correct rim width allows the tire sidewall to flex where the designers meant for the flex to occur. There is a wide range of tires that will fit a specific rim width. After you know what size range of tire will fit your wheels, you can pick a size based on aspect ratio and height of the different tire sizes. A rim that is too narrow in relation to the...
  15. Factory Paint Process

    In the early days of the automobile industry, painting was a slow process. It was applied manually and dried for weeks at room temperature by solvent evaporation. 1930 Packard Factory As mass production of cars made the process untenable, paint began to be dried in ovens. Nowadays, two-component (catalyzed) paint is usually applied by robotic arms and cures in just a few hours either at room temperature or in heated booths. (Note- That is why car paint can be waxed as soon as the new owner...
Loading...