Uconnect problem

Discussion in 'Challenger DIY/Tech Info' started by Clazar, Mar 14, 2024.

Page 1 of 3
Car Parts
  1. Mar 14, 2024 at 7:56 AM #1
    Clazar

    Clazar Active Member

    Posts:
    27
    Likes Received:
    2
    Joined:
    Mar 1, 2024
    Location:
    Pittsburgh
    2021 Scat pack with Uconnect Nav. When I first start the car I have a completely black Uconnect screen. It's not until I put the radio on do I have power to the system. I then have to hit the acknowledge button to have the screen available to use. Is there possibly a blown fuse somewhere or is the unit bad ?? Any help is greatly appreciated.
     
  2. Mar 14, 2024 at 10:11 AM #2
    SRT-Tom

    SRT-Tom Well-Known Member Staff Member Super Moderator Article Writer

    Posts:
    8,242
    Likes Received:
    2,796
    Joined:
    Oct 2, 2011
    Location:
    southern New Jersey
    Did you try disconnecting your car battery?

    If you did and it didn't resolve the problem, you may want to try a reset by touching the top right-hand corner of your screen (see video, below).

     
  3. Mar 14, 2024 at 11:03 AM #3
    Clazar

    Clazar Active Member

    Posts:
    27
    Likes Received:
    2
    Joined:
    Mar 1, 2024
    Location:
    Pittsburgh
    Thank You. I tried the battery disconnect, that didn't work. Next i'll try the other reset.
     
  4. Mar 14, 2024 at 2:16 PM #4
    Clazar

    Clazar Active Member

    Posts:
    27
    Likes Received:
    2
    Joined:
    Mar 1, 2024
    Location:
    Pittsburgh
    The resets did not work. It's like i'm not getting any power to it till I turn the radio on. Anything else you can think of ??
     
  5. Mar 14, 2024 at 3:44 PM #5
    HellKitten

    HellKitten Full Access Member

    Posts:
    439
    Likes Received:
    177
    Joined:
    Sep 16, 2020
    Location:
    NH
    Well if the radio is off then the screen should be black. It could be a users setting. Plus you can go to infotainment.com for information.
     
  6. Mar 14, 2024 at 5:17 PM #6
    Clazar

    Clazar Active Member

    Posts:
    27
    Likes Received:
    2
    Joined:
    Mar 1, 2024
    Location:
    Pittsburgh
    I also thought it might be a setting. Nothing I could find. But I have no access to anything until I turn the radio on. I still wonder if a fuse that powers the unit when the car is started is out.
     
  7. Mar 14, 2024 at 5:43 PM #7
    atlsrt44

    atlsrt44 Member

    Age:
    44
    Posts:
    12
    Likes Received:
    4
    Joined:
    Mar 8, 2024
    Location:
    US
    Sounds like a setting. Tried clicking the screen off button?

    Sent from my SM-S928U using Tapatalk
     
  8. Mar 14, 2024 at 6:06 PM #8
    Clazar

    Clazar Active Member

    Posts:
    27
    Likes Received:
    2
    Joined:
    Mar 1, 2024
    Location:
    Pittsburgh
    Where is the screen off button at ??
     
  9. Mar 15, 2024 at 5:12 PM #9
    SRT-Tom

    SRT-Tom Well-Known Member Staff Member Super Moderator Article Writer

    Posts:
    8,242
    Likes Received:
    2,796
    Joined:
    Oct 2, 2011
    Location:
    southern New Jersey
    You can try two more things. You can pull and reinstall the U-Connect fuse (see video, below). Or, you can open the radio and use Deoxit to clean the connections and the circuit boards.

     
    Clazar likes this.
  10. Mar 15, 2024 at 8:43 PM #10
    Clazar

    Clazar Active Member

    Posts:
    27
    Likes Received:
    2
    Joined:
    Mar 1, 2024
    Location:
    Pittsburgh
    Thank you, I'll try that tomorrow.
     
Page 1 of 3