Also, if you can't get 700hp from a naturally aspirated Hemi, then you just like engines that idle below, say, 2000 RPM too much.
you CAN edit the original post.
They can LOOK fine even with too little air in them. Get a cheap digital pressure gauge and be sure.
Now THAT is a useful public service announcement!
Oh boy. Non-running. I cannot offer you more specific help, but a needle probe for checking wires without having to strip their voltage would be...
TURBOCHARGER SYSTEM NOTES: The more I read about turbochargers, the more I like them. There is just so much flexibility in how they are set up to...
I think to somewhat still have some function with a Hellcat, one would want to have some means of slaving the bypass valve to some pressure source...
[ATTACH] For those people who like metric, the crossover point for kilowatts and newton-meters is 9548.8 rpm So, a rule of thumb for metric power...
Get yourself a multimeter with a DC ammeter on it. Then you can directly measure draw from the battery just by clamping the probe around any wire...
nice.
Strange, the sudden battery death. Is "leadsled" past tense of "leadsl?" I wanted to leadsl, so I leadsled. Leadsling is the Bomb! (absolutely...
I found it fascinating to know one drag strip being refurbished had a concrete launch pad that was actually heated. With a warm launch pad, the...
Hmmmm. "Last Call" like the Durango Hellcat was?
At 6000 RPM, the intake valve, if open for 220 degrees, takes 220/360X60/6000seconds). A mere 0.00611 seconds of intake valve opening. .012...
Since long-tube headers scavenge so well, I am curious if some of the gasoline injected is being discarded out the exhaust valves, unburnt. If it...
Yes, but the old Charger "Electric razor' front end is also echoed. Funny you should mention it, Stellantis is doing this with the Maserati...
Scoops would work best if place in clean air or at the grille opening (famed high-pressure area) and if they were large enough to flow maximum air...
One of the older systems is constant-flow fuel injection systems. With enough mechanical trickery, one must be able to set those up to respond to...
From a Dodge Charger, purportedly: Center left thing with two small fuses beneath it [IMG] Also: [MEDIA]
Coinciding nicely with the fact that Holley, in its rush to emasculate itself has decided to quit producing ANY carburetors, Edelbrock, which...
I think Dodge wholesale abandoned the 3.5L, so no one is making much of anything for it.
The high stance and narrow tires are something you spot from a hundred or so yards away once you've owned a Hellcat. The Hellcats prowl the...
The Procharger has a rising boost curve so the torque would be reasonably manageable. For best performance, you'd want it in the highest possible...
That is a 31 percent gain in drag to go from 122 to 140mph. Since drag is a function of the square of speed and hp is a function of the cube of...
The thumbnail of that engine on the video is the best view of the strange exhaust port layout I have yet seen. That Exhaust port layout just BEGS...
Separate names with a comma.
