I started fitting my half covers today... The pass side apparently will have to wait til the catch can is installed because of the PVC hose... I notched out the front bottom of the driver's side cover for hose clearance but I am kinda stuck on what to do with the rear of it because of the purge sensor... I have searched to no avail for a good way to clear it short of cutting the top of the new cover... Which I will not do... I saw where one guy simply removed the bracket and laid it there on top of the fuel rail... I tried that but it is not enough... I am curious how some of you did this...??? Thank you...
not sure if this will help http://i922.photobucket.com/albums/ad62/10DYRT/Stuff for sale 005_zps5wsfkoki.jpg I found a pic of the covers on the engine but can't seem to be able to post it. Yes I did have to cut the right side to make it fit. Traced it out then used a Dremmel tool on low speed as to not melt the plastic.
