I have looked this up, but I have a question. My wife recently picked up her 2022 Challenger Scat Pack with the Dynamics Package with the larger wheel and 275 tires. I wanted to have it lowered, but the front is (I believe from measuring) 29.5 inches from a flat floor to fender and rear is 30.5. I looked at lowering springs and I see that the front measurements will be lowered more than the rear. I do not want to do coil springs. What are my options? I would like to achieve an even stance or 1/2 inch in difference if possible. Thanks in advance, Ed.
As they are brand new springs, you could go old school and cut 1/4-1/2 a spring loop at a time until you like it. Make surer you do it COLD, no Hot Wrench (torch) Yes, it will void any warrantee, but so what, if it makes it the way you like. https://www.homedepot.com/p/DEWALT-...-1-3-4-in-Bandsaw-Tool-Only-DCS377B/314686799
You can get a lowering kit right from Mopar and have them install it for NO voiding of the warranty. There are other aftermarket kits available if you hate having a valid warranty.