1. benjamin.mcghee

    benjamin.mcghee New Member

    Posts:
    2
    Likes Received:
    0
    Joined:
    Jun 26, 2015
    What type of gears are you guys running in these challenger r/t with a stroker motor, built trans,converter,and nitrous in the 1/4 to get down the track with good 60ft
     
  2. Shaggy

    Shaggy Administrator Staff Member

    Age:
    42
    Posts:
    997
    Likes Received:
    24
    Joined:
    Jul 18, 2011
    Location:
    Arizona
    What is yours set at now?
     
  3. benjamin.mcghee

    benjamin.mcghee New Member

    Posts:
    2
    Likes Received:
    0
    Joined:
    Jun 26, 2015
    3.06
     
  4. Challenger56

    Challenger56 Member

    Age:
    62
    Posts:
    11
    Likes Received:
    1
    Joined:
    Nov 3, 2014
    I have a 2012 r/t and have put cold air intake, headers, axle back exhaust, and stage 3 cam in it, and 2800 stall converter.

    The car Dyno's close to 470 hp at this point.

    Since the upgrade, I installed a getrag rearend in the car with a 3.91 gear, up from stock 3.06 from factory. Transmission is automatic 5 speed.

    That really increased performance with the other things I had done.

    Car runs 2800 at 70 mph, and about 3800 at 100 mph.

    Don't know if that is what your looking for, but the rearend change really made a difference for me.
     
    bad13 likes this.
  5. ZEN357

    ZEN357 Full Access Member

    Posts:
    164
    Likes Received:
    18
    Joined:
    Feb 14, 2018
    Location:
    Wheeling, WV
    I'm running 3.90's.
     

Share This Page